Skip to main content

PH SERIES

EPS office unit, PH series, 3 × 6 m, wired and ready, with barred windows

PH-series EPS office unit, 3.00 x 6.00 x 2.50 m, 18 m², same specification as PH-2602. Wired, with ceiling lights, an exhaust fan and barred sliding windows. 89,900 THB (4,990 THB/m²) per unit.

ตู้ออฟฟิศสำนักงาน EPS รุ่น PH 3x6 เมตร ผนังสีเทา ประตูบานเปิด หน้าต่างบานเลื่อนติดเหล็กดัด
ภายในตู้ออฟฟิศ EPS รุ่น PH พื้นลายไม้ หลอดไฟบนเพดาน และพัดลมระบายอากาศที่ผนังด้านสกัด
ภายในตู้ออฟฟิศ EPS รุ่น PH มองจากอีกด้าน เห็นประตูและหน้าต่างเหล็กดัด
ตู้เบรกเกอร์ สวิตช์ และปลั๊กไฟภายในตู้ออฟฟิศ EPS ร้อยสายในราง
3 × 6 × 2.5Size (m)
18 m²Floor area
1–2 unitsUnits
PHSeries
฿89,900(4,990 THB/m²)Price
Doors & windowsDoors 1 door · swing doorWindows 1 window · with security grille

As shown in the photos — doors and windows can be added, removed or repositioned to order.

Factory price

฿89,900(4,990 THB/m²)

Factory price · negotiable by quantity · on display at the showroom

Type: New, unused (old stock)Ready to ship from: Suwinthawong
Also available to rent — from 4,500 THB per unit per monthSee rental units →

Same price per square metre, not the same building

Quotes for site-built prefab buildings are typically 5,500–9,000 THB per square metre — but that figure leaves some things out.

Container To Build knock-down unitTypical site-built prefab
FloorFloor frame and flooring included — no concrete slab neededA concrete slab must be poured first, charged separately
WallsPU-foam insulated walls and ceilingOften steel sheet and board only, no insulation
ElectricsWired in our factoryDepends on the quote
InstallationCraned in and installed in one daySeveral days to several weeks
RelocationLift and move the whole unitDismantle and rebuild

Before comparing quotes, ask these four questions

  1. Is the concrete slab or foundation included?
  2. Are the walls insulated?
  3. Is the electrical work included?
  4. Can it be moved after the project ends?

Put all four into each quote, then compare the totals. See the floor and the wall core for yourself at our showroom.

Everything you should know before buying

We write this on every page because it matters to your decision.

  • Condition: new and never used, but built some time ago and kept in stock (old stock). Built in our own factory — see it at the showroom before you decide.
  • This price includes the steel frame, PU-foam insulated walls and ceiling, floor, wiring and TOSTEM doors and windows.
  • The floor is built in — no concrete slab is needed, only level ground. Most site-built prefab needs a concrete slab first, charged separately.
  • This price does not include delivery or crane unloading, which are quoted by distance to your site before you decide.
  • A knock-down unit is not a permanent masonry building. With normal care it lasts 20–30 years; Thailand's 2026 construction-cost appraisal table gives knock-down houses a 20-year life and masonry houses 50.
  • Whether a building permit is needed depends on local regulations and the local authority decides — check before ordering. If you need to apply, we prepare the documents (paid service).
  • The whole unit can be lifted and moved without dismantling — a good fit for leased land — and you can add units later.
  • A unit you buy never ends up as scrap: you can move it, resell it or sell it back, so it keeps its value — unlike a building fixed to the land, which has to be demolished when you no longer need it.
  • Lead time: 2–3 days from stock, 3–7 days if built to order, installed on site in one day.
  • Payment: credit-card instalments are available, subject to your card issuer's terms.
  • You can check every point above in person — including the floor and the wall core — at our Bangna and Suwinthawong showrooms.

Read more (Thai): cost per square metre — building a house vs site-built prefab vs knock-down units →

Showroom

A purchase of around 100,000 baht — see the real thing first.

We would love to show you around the showroom: open the doors, compare models side by side, then decide.

Product details

EPS office unit, PH series, 3 × 6 m

A PH-series office unit with EPS foam walls, 3.00 m wide, 6.00 m long and 2.50 m high outside, giving 18 m² of floor space. Same specification as PH-2602. It comes wired, with ceiling lights and an exhaust fan already fitted, so it is ready to use once it is set down and connected to power. Suited to a site office, an office inside a factory, or a document room.

The sliding windows come fitted with steel security bars and the door is a lockable swing door, so the unit can be left closed overnight.

What the photos show

  • Grey wall panels with a white frame and trim
  • Swing door with lever handle
  • Sliding windows with steel security bars
  • Power inlet on the outside wall
  • Breaker box, switch and socket inside, with the wiring run in trunking
  • Two ceiling light fittings and an exhaust fan on the end wall
  • Wood-pattern floor covering

PH series with EPS walls: specification

  • Galvanised steel frame with anti-rust paint, floor frame welded at every joint
  • EPS foam walls, PU foam insulated ceiling
  • Viva board floor with a finished covering
  • Swing door, sliding windows
  • Built-in lighting

89,900 THB (4,990 THB/m²) per unit (factory price, excluding transport and craning). For several units, joining units into a larger room or adding air conditioning, send us your site details for a quote, or see the real thing at our showroom on any working day.

Around 100,000 baht — see the real thing at our showroom before you decide

Tell us the model, quantity and site — we send a quotation right away, and we are happy to book a visit so you can open the doors and compare models in person.

Mon – Sat, 8:30 – 17:30 (closed Sundays and public holidays)